MSI Creator 15 A10SE-035MX RAM upgrade specifications
The MSI Creator 15 A10SE-035MX laptop features DDR4-SDRAM memory upgrade capabilities with two SO-DIMM slots supporting a maximum RAM capacity of 64 GB. The memory operates at 2666 MHz frequency. Compatible upgrade modules must match the SO-DIMM form factor specifications for proper installation in the available memory slots. Current memory configuration and upgrade options are based on the laptop's DDR4 architecture and slot availability.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2666 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2666 (PC4-21328) |
| Bandwidth | 21.3 GB/s |
| Laptop Release date | 07 June 2021 |
Additional Notes
- Dual channel memory architecture requires installing identical capacity modules to achieve maximum data throughput and eliminate single channel bandwidth bottlenecks.
- The MSI Creator 15 A10SE-035MX utilizes a SODIMM architecture which demands manual access to the internal motherboard layout for physical module replacement.
- Higher frequency DDR4 modules exceeding 2666 MHz will automatically downclock to match the hardware controller limit of the system.
- Populating both slots with 32 GB modules is necessary to reach the maximum supported system ceiling and prevent memory paging during high intensity creative workloads.
- Upgrading memory requires the removal of the bottom chassis panel which involves navigating delicate internal clips and potential factory seal considerations.
- Total system latency remains dependent on the slowest installed module if mismatched timings are used across the two available slots.
- The 64 GB capacity limit necessitates 1.2V DDR4 sticks to ensure thermal stability and power compatibility with the existing onboard voltage regulators.