MSI Creator 15 A10UET-228IT RAM upgrade specifications
MSI Creator 15 A10UET-228IT laptop supports DDR4-SDRAM memory upgrade through two SO-DIMM slots. Maximum compatible RAM capacity reaches 64 GB total. Memory specifications include 3200 MHz frequency operation. Upgrade configuration utilizes SO-DIMM form factor modules. Compatible memory options accommodate expansion from factory-installed capacity to maximum 64 GB specifications for enhanced multitasking and application performance on the MSI 15 A10UET-228IT model.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 01 February 2021 |
Additional Notes
- Dual channel memory architecture is only achievable when utilizing both physical slots with identical module capacities and timings.
- The 64 GB threshold represents the addressable limit of the internal memory controller regardless of individual module density availability.
- Accessing the SO-DIMM slots on the MSI Creator 15 A10UET-228IT requires the removal of the entire base panel which may be secured by a factory seal sticker.
- Installing modules with frequencies exceeding 3200 MHz will result in an automatic downclocking to match the hard-coded firmware limitations of the processor.
- The use of high density 32 GB modules for the maximum configuration necessitates low voltage DDR4 compatibility to ensure thermal stability within the slim chassis.
- Populating only a single slot will create a memory bandwidth bottleneck during rendering tasks or multi-threaded creative workflows.
- Replacement of existing memory is mandatory for capacity increases because the hardware lacks additional vacant slots beyond the primary 2 interfaces.