MSI Gaming GE62 6QD-1033XES Apache Pro RAM upgrade specifications
The MSI GE62 6QD-1033XES Apache Pro gaming laptop features DDR4-SDRAM memory upgrade specifications. The device contains 2x SO-DIMM memory slots supporting maximum RAM capacity of 32 GB. Compatible memory operates at 2133 MHz frequency with SO-DIMM form factor. Upgrade options allow installation of additional DDR4-SDRAM modules to reach specified maximum capacity. The GE Series Apache Pro model accommodates memory expansion through its dual SO-DIMM slots, providing flexibility in RAM upgrade configurations for enhanced system performance.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2133 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2133 (PC4-17064) |
| Bandwidth | 17.1 GB/s |
| Laptop Release date | 19 May 2016 |
Additional Notes
- The dual slot channel architecture requires installing identical memory modules to enable maximum memory bandwidth and prevent system timing synchronization issues.
- Upgrading the MSI GE62 6QD-1033XES Apache Pro beyond the manufacturer limit of 32 GB will result in a failure to post due to BIOS level addressing restrictions.
- High frequency modules installed in this system will automatically downclock to 2133 MHz because the chipset lacks XMP profile support for faster memory speeds.
- The SO-DIMM form factor necessitates 260 pin modules which are physically incompatible with older DDR3 layout standards or desktop DIMM slots.
- Internal access for hardware maintenance typically involves removing the entire bottom chassis panel which may impact certain regional warranty seals depending on local consumer laws.
- Total memory capacity is distributed across 2 physical sockets meaning a single 32 GB module cannot be used to reach the maximum threshold.
- System stability relies on using non-ECC unbuffered memory as the mobile processor and motherboard do not support error correction code logic.