MSI Gaming GE62 6QD-683XTH Apache Pro RAM upgrade specifications
The MSI GE62 6QD-683XTH Apache Pro gaming laptop features DDR4-SDRAM memory upgrade specifications. The device contains 2x SO-DIMM slots supporting maximum RAM capacity of 32 GB total. Compatible memory operates at 2133 MHz frequency with SO-DIMM form factor. Upgrade specifications enable expansion of system memory to enhance performance capabilities. Maximum supported capacity represents the combined memory limit across both available slots.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2133 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2133 (PC4-17064) |
| Bandwidth | 17.1 GB/s |
| Laptop Release date | 18 June 2016 |
Additional Notes
- Dual channel memory architecture requires installing matched modules in pairs to maximize the data transfer rates between the processor and the system memory.
- Installing modules with higher clock speeds than 2133 MHz results in automatic downclocking to match the integrated memory controller hardware limitations of the MSI GE62 6QD-683XTH Apache Pro.
- The 32 GB capacity limit indicates that the motherboard chipset only supports high density modules up to 16 GB per individual slot.
- Physical access to the SO-DIMM slots requires the removal of the entire base plate which may involve breaking a factory seal sticker over a screw hole.
- The selection of DDR4 technology over older standards ensures lower operating voltages which reduces heat generation within the chassis during heavy gaming loads.
- Latency performance depends on choosing modules with low CAS latency values since the motherboard firmware does not allow for manual timing adjustments.
- The absence of additional slots means that reaching the maximum memory capacity requires replacing all existing pre-installed modules rather than adding to them.