MSI Gaming GE63 8SE-032ES Raider RGB RAM upgrade specifications
The MSI GE63 8SE-032ES Raider RGB gaming laptop features DDR4-SDRAM memory upgrade specifications. Compatible RAM utilizes SO-DIMM form factor across 2 memory slots, supporting maximum capacity of 32 GB total. Operating frequency specifications indicate 2666 MHz compatibility. Upgrade configurations allow installation of compatible DDR4 modules to expand existing memory capacity within the defined slot and maximum parameters of the Gaming GE series specifications.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2666 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2666 (PC4-21328) |
| Bandwidth | 21.3 GB/s |
| Laptop Release date | 10 January 2019 |
Additional Notes
- The 32 GB maximum capacity requires 2 modules of 16 GB each, as only 2 physical slots exist.
- DDR4-2666 represents the officially supported speed ceiling, though the chipset may accept higher frequencies that downclock to 2666 MHz.
- SO-DIMM form factor restricts compatibility to laptop-specific modules; desktop DIMM memory is physically incompatible.
- Mixing modules with different speeds forces all installed memory to operate at the slowest module's frequency.
- Single-module configurations lose dual-channel bandwidth, reducing memory throughput by approximately 50 percent in bandwidth-sensitive applications.
- The Intel 8th generation platform underlying this model uses DDR4-2666 as its native JEDEC speed, meaning faster XMP profiles may not activate without BIOS support.
- Upgrading beyond 32 GB is impossible due to chipset memory controller limitations, regardless of module availability.
- Memory replacement typically requires bottom panel removal, which may void warranty seals depending on regional consumer protection laws.
- Mismatched module capacities still enable dual-channel mode only up to the smaller module's capacity, with remaining capacity reverting to single-channel operation.
- Non-standard voltage modules (low-voltage 1.2V variants or overvolting types) may cause POST failures or system instability.
- ECC SO-DIMM modules are incompatible with consumer mobile platforms lacking error-correction support in the memory controller.