MSI Gaming GE75 8SE-035XES Raider RAM upgrade specifications

MSI GE75 8SE-035XES Raider MSI GE75 8SE-035XES Raider MSI GE75 8SE-035XES Raider MSI GE75 8SE-035XES Raider MSI GE75 8SE-035XES Raider

MSI GE75 8SE-035XES Raider Gaming series laptop features DDR4-SDRAM memory upgrade specifications. The device supports 2x SO-DIMM slots with maximum RAM capacity of 32 GB. Compatible memory operates at 2666 MHz frequency using SO-DIMM form factor. Upgrade capacity allows installation of DDR4 modules per specifications to enhance system performance. MSI GE75 8SE-035XES Raider memory slots accept standard DDR4-SDRAM modules within frequency parameters. Maximum memory upgrade specifications support up to 32 GB total capacity across dual slots.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR4-SDRAM
Frequency2666 MHz
Maximum RAM32 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-2666 (PC4-21328)
Bandwidth21.3 GB/s
Laptop Release date10 January 2019

Additional Notes

  • Dual channel memory architecture requires installing modules in pairs to achieve maximum memory bandwidth and reduce latency in CPU heavy gaming applications.
  • The absence of soldered memory allows for the replacement of both factory modules to reach the maximum supported 32 GB capacity.
  • Installing modules with frequencies higher than 2666 MHz results in automatic downclocking to match the limitations of the HM370 chipset and 8th Gen Intel processor.
  • Accessing the SO-DIMM slots requires the removal of the entire bottom chassis plate which involves penetrating a Factory Seal sticker in some regions.
  • The 32 GB maximum capacity is limited by the BIOS and memory controller despite the physical ability of DDR4 technology to support 64 GB kits.
  • Mixing modules with different CAS latencies forces the system to operate at the timings of the slowest installed stick.
  • Thermal management depends on the integrated heat spreaders of the laptop chassis as the memory slots lack dedicated active cooling.
  • Voltage requirements are fixed at 1.2V for standard DDR4 SO-DIMM compatibility without support for XMP profiles in the default BIOS environment.