MSI Gaming GE75 Raider 8SG-088UK RAM upgrade specifications

MSI GE75 Raider 8SG-088UK MSI GE75 Raider 8SG-088UK MSI GE75 Raider 8SG-088UK MSI GE75 Raider 8SG-088UK MSI GE75 Raider 8SG-088UK

The MSI GE75 Raider 8SG-088UK Gaming series laptop supports DDR4-SDRAM memory upgrades via 2x SO-DIMM slots. Maximum RAM capacity reaches 32 GB total, with memory operating at 2666 MHz frequency. The SO-DIMM form factor memory modules are compatible with specifications for this GE75 Raider model. RAM upgrade slots accommodate compatible DDR4-SDRAM modules meeting the stated capacity and frequency specifications.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR4-SDRAM
Frequency2666 MHz
Maximum RAM32 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-2666 (PC4-21328)
Bandwidth21.3 GB/s
Laptop Release date28 December 2018

Additional Notes

  • The 2x SO-DIMM slot configuration requires matched pairs for optimal dual-channel performance; single-module upgrades will operate in single-channel mode, reducing bandwidth by approximately 50 percent and degrading gaming frame rates.
  • DDR4-2666 MHz specification indicates this system predates DDR4-3200 standardization; third-party DDR4-3200 modules will throttle to 2666 MHz due to BIOS/firmware limitations, eliminating any speed advantage from newer stock.
  • 32 GB maximum capacity ceiling means both SO-DIMM slots must be populated with 16 GB modules; there is no upgrade path beyond this threshold without replacing the entire memory configuration.
  • SO-DIMM form factor occupies significantly less physical space than UDIMM; this compact layout provides minimal clearance for tall heatspreaders, which may interfere with the cooling system or prevent module insertion depending on heatsink height.
  • The 2-slot architecture creates a single point of failure risk; loss or degradation of either module results in complete system instability rather than graceful performance reduction.
  • Warranty coverage typically remains intact for SO-DIMM replacement if modules meet OEM specifications (DDR4, 2666 MHz or lower, SO-DIMM form factor); non-standard frequencies or timings may void coverage depending on MSI policy.