MSI Gaming GF63 11UC-283CA Thin RAM upgrade specifications
The MSI GF63 11UC-283CA Thin gaming laptop features DDR4-SDRAM memory configuration with two SO-DIMM slots for RAM upgrade capability. The maximum memory capacity supported is 64 GB total, with DDR4 modules operating at 3200 MHz frequency. The SO-DIMM form factor enables straightforward memory expansion for enhanced multitasking and performance. Compatible upgrades require DDR4-SDRAM specifications matching the laptop's native frequency and slot configuration.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 02 May 2022 |
Additional Notes
- Dual channel architecture requires matching memory modules to reach maximum peak bandwidth and avoid asynchronous latency issues.
- The MSI GF63 11UC-283CA Thin utilizes a standard voltage profile which necessitates the use of 1.2V hardware to maintain thermal stability within the slim chassis.
- Maximum capacity expansion to 64 GB requires the removal of all factory installed modules because the system lacks additional vacant headers.
- Physical installation involves accessing the internal motherboard assembly which typically necessitates breaking a factory seal on the bottom panel.
- Memory speed is limited by the integrated processor controller meaning modules with higher rated frequencies will downclock to the 3200 MHz ceiling.
- System stability for professional workloads is feasible through the installation of high density 32 GB sticks in both slots to saturate the memory controller.
- Lower latency timings on aftermarket modules provide a marginal performance increase in frame pacing without exceeding the frequency limit.