MSI Gaming GF63 11UC-284CA Thin RAM upgrade specifications
The MSI GF63 11UC-284CA Thin gaming laptop features DDR4-SDRAM memory with two SO-DIMM slots supporting a maximum RAM capacity of 64 GB. The compatible memory operates at 3200 MHz frequency. Users can upgrade the RAM in this MSI Gaming GF series model by replacing or adding SO-DIMM modules. The laptop's memory upgrade specifications indicate support for DDR4 technology, allowing for enhanced multitasking and performance improvements through increased RAM capacity within the defined maximum specifications.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 02 May 2022 |
Additional Notes
- Dual channel architecture requires matching memory module densities across both slots to achieve peak memory bandwidth and prevent synchronous latency issues.
- The MSI GF63 11UC-284CA Thin utilizes a mobile chipset that lacks support for XMP profiles, meaning modules must rely on standard JEDEC timings to reach the rated 3200 MHz frequency.
- Internal access for memory installation requires the removal of the entire bottom chassis cover, which may involve breaking a factory seal sticker in certain regions.
- High capacity 32 GB modules used to reach the 64 GB limit produce more heat than lower density sticks, necessitating adequate airflow during sustained workloads.
- Mixing memory modules with different CAS latencies will force the system to default to the slowest timing available, potentially hindering CPU communication speeds.
- The physical height of the SO-DIMM slots restricts upgrades to standard height modules, as heat spreaders or oversized PCB designs will interfere with the slim chassis closure.
- Standard voltage DDR4 modules are required because the motherboard does not support undervolted or low voltage variations outside of the 1.2V specification.