MSI Gaming GF63 Thin 9SC-653 RAM upgrade specifications
The MSI GF63 Thin 9SC-653 Gaming series laptop features two SO-DIMM memory slots supporting DDR4-SDRAM technology at 2666 MHz frequency. The upgrade specifications indicate a maximum RAM capacity of 64 GB total memory configuration. Compatible memory modules must match DDR4-SDRAM standards and SO-DIMM form factor specifications for proper installation in available slots.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2666 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2666 (PC4-21328) |
| Bandwidth | 21.3 GB/s |
| Laptop Release date | 22 July 2019 |
Additional Notes
- Dual channel mode functionality requires installing modules in pairs to optimize memory bandwidth and reduce system latency during heavy processing tasks.
- The MSI GF63 Thin 9SC-653 utilizes a small form factor design that necessitates grounded handling to prevent electrostatic discharge damage to the compact internal circuitry during component installation.
- Upgrading to the maximum supported capacity involves replacing all existing factory modules because the motherboard architecture lacks additional vacant slots for expansion.
- Installing memory modules with frequencies higher than 2666 MHz results in automatic downclocking to match the hardcoded limitations of the chipset or processor memory controller.
- Accessing the SO-DIMM sockets requires the removal of the entire base panel which involves breaking a factory seal sticker in certain regions potentially affecting local warranty terms.
- Mixing modules with different CAS latency timings forces the system to operate at the slowest common denominator which can impede overall synthetic performance scores.
- High density 32 GB sticks are required to reach the peak threshold of 64 GB since the hardware is limited to only 2 physical interfaces.