MSI Gaming GF66 12UC-235AU Katana RAM upgrade specifications
MSI GF66 12UC-235AU Katana Gaming series laptop features DDR4-SDRAM memory upgrade specifications with 2x SO-DIMM slots supporting maximum capacity of 64 GB. Compatible memory modules operate at 3200 MHz frequency. Upgrade slots accommodate SO-DIMM form factor specifications, providing expansion capabilities for enhanced system performance and multitasking applications.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 22 July 2022 |
Additional Notes
- The dual channel architecture requires symmetrical module pairs to achieve full memory bandwidth and prevent single channel throughput bottlenecks.
- The 64 capacity limit necessitates the use of high density 32 dual rank modules due to the physical constraint of having only 2 available slots.
- Installing memory with speeds exceeding 3200 will result in automatic downclocking as the system firmware enforces predefined frequency profiles.
- The MSI GF66 12UC-235AU Katana utilizes a standard SO-DIMM form factor which allows for third party hardware swaps without proprietary connector restrictions.
- Upgrading to the maximum supported volume allows for heavy multitasking and virtualization but increases the thermal load within the compact notebook chassis.
- Memory latency timings must match the existing factory module if only 1 slot is being populated to ensure system stability and avoid boot failures.
- The absence of soldered memory on the motherboard ensures that both banks can be replaced if a single module suffers from hardware degradation.