MSI Gaming GF75 10SCSR-642 Thin RAM upgrade specifications
The MSI GF75 10SCSR-642 Thin Gaming series laptop supports DDR4-SDRAM memory upgrades through 2x SO-DIMM slots. Maximum RAM capacity reaches 64 GB when both slots are populated with compatible modules. Operating frequency specifications indicate DDR4-2666 MHz support. Memory upgrade procedures require accessing internal components to install compatible SO-DIMM form factor modules. Specifications confirm upgrade compatibility with standard DDR4 memory configurations meeting laptop requirements.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2666 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2666 (PC4-21328) |
| Bandwidth | 21.3 GB/s |
| Laptop Release date | 23 July 2021 |
Additional Notes
- The presence of 2 physical SO-DIMM slots allows for dual-channel memory configurations which doubles the available bandwidth compared to single-channel setups.
- Upgrading memory on the MSI GF75 10SCSR-642 Thin requires the removal of the entire lower chassis panel as there is no dedicated quick-access hatch for RAM.
- Installation of modules with higher frequencies will result in automatic downclocking to 2666 MHz due to hardware controller limitations.
- Reaching the 64 GB maximum capacity necessitates the removal of all existing factory modules since no vacant expansion slots remain available for additive upgrades.
- Mixing modules with different timings or densities may lead to system instability or a fallback to lower JEDEC profiles.
- The internal layout requires the use of standard 1.2V DDR4 modules to ensure thermal stability and power delivery compliance within the thin chassis design.