MSI Gaming GF76 12UGS-009NL Katana RAM upgrade specifications
The MSI GF76 12UGS-009NL Katana gaming laptop features DDR4-SDRAM memory configuration with 2x SO-DIMM slots for RAM upgrade capability. Maximum memory capacity reaches 64 GB, supporting DDR4 modules operating at 3200 MHz frequency. Specifications indicate compatible SO-DIMM form factor RAM modules for upgrade installation in the GF series Katana model.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 19 December 2021 |
Additional Notes
- Full capacity expansion requires the replacement of both existing modules because the system lacks additional vacant slots.
- The dual channel architecture reaches peak memory bandwidth only when paired modules share identical timings and density.
- Operating at the 3200 MHz frequency ceiling necessitates modules that support JEDEC standard profiles to avoid downclocking on the MSI GF76 12UGS-009NL Katana motherboard.
- High density 32 GB modules are required in each slot to reach the 64 GB architectural limit due to the physical constraint of the 2 slot layout.
- Internal component access involves navigating a plastic subframe which may require specialized nylon tools to prevent cosmetic damage to the chassis clips during the upgrade process.
- Potential latency bottlenecks occur if 1Rx16 staggered memory modules are used instead of 1Rx8 or 2Rx8 configurations.
- Thermal management remains a factor for the memory area as the proximity to the dedicated heat pipes can influence the long term stability of overclocked or high voltage aftermarket SODIMMs.