MSI Gaming GL63 8SD-878CA RAM upgrade specifications

MSI GL63 8SD-878CA MSI GL63 8SD-878CA MSI GL63 8SD-878CA MSI GL63 8SD-878CA MSI GL63 8SD-878CA

The MSI GL63 8SD-878CA gaming laptop features DDR4-SDRAM memory upgrade capabilities with 2x SO-DIMM slots supporting a maximum RAM capacity of 32 GB. Compatible memory modules operate at 2666 MHz frequency using SO-DIMM form factor. Specifications indicate support for dual-channel memory configuration, enabling users to enhance system performance through compatible DDR4 upgrade modules. The GL series gaming platform specifications define memory slot availability and maximum supported capacity for RAM expansion.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR4-SDRAM
Frequency2666 MHz
Maximum RAM32 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-2666 (PC4-21328)
Bandwidth21.3 GB/s
Laptop Release date02 October 2019

Additional Notes

  • Dual channel memory architecture is only achievable when installing two identical modules to double the available bandwidth for the processor.
  • The MSI GL63 8SD-878CA utilizes a mobile form factor that excludes the use of standard desktop DIMM modules due to physical size and pin configuration differences.
  • Installing memory rated higher than 2666 MHz results in a downclocking bottleneck because the motherboard chipset locks the maximum frequency to the specified limit.
  • Occupying both slots with 16 GB modules is necessary to reach the maximum system capacity since the firmware does not support 32 GB single stick density.
  • Upgrading requires a teardown of the bottom chassis which involves breaking a factory seal thin film that may impact specific regional warranty terms.
  • Latency timings should match existing hardware to prevent system instability or automatic frequency reduction to the lowest common denominator.
  • The internal layout requires the removal of the entire base plate for access which demands the use of non conductive prying tools to avoid static discharge on the logic board.