MSI Gaming GL63 9SE-491CA RAM upgrade specifications
The MSI GL63 9SE-491CA Gaming laptop features DDR4-SDRAM memory configuration with 2x SO-DIMM slots available for upgrade. Maximum RAM capacity reaches 64 GB, supporting memory modules operating at 2666 MHz frequency. Compatible memory upgrades utilize the SO-DIMM form factor specification. Current specifications enable flexible memory expansion options within the laptop's architecture constraints.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2666 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2666 (PC4-21328) |
| Bandwidth | 21.3 GB/s |
| Laptop Release date | 13 May 2019 |
Additional Notes
- Dual channel mode requires identical module densities across both slots to maximize memory controller throughput and reduce latency during gaming workloads.
- The 64 GB capacity limit necessitates the use of high density 32 GB modules per slot which may require a BIOS update for proper recognition on the MSI GL63 9SE-491CA hardware.
- Installing memory with frequencies exceeding 2666 MHz results in automatic downclocking to match the native chipset speed regardless of the module ratings.
- Internal access for memory replacement involves removing the entire bottom chassis undercover which potentially exposes sensitive heat pipes and requires careful handling of the plastic retention clips.
- The SO-DIMM form factor limits cooling options to passive heat dissipation through the chassis airflow as there is no space for aftermarket active memory coolers.
- Upgrading from a single module to a two module configuration provides a significant performance gain in CPU bound tasks by doubling the available memory bandwidth.
- Compatibility is restricted to DDR4 modules as the physical keying and voltage requirements of the slots prevent the installation of older DDR3 or newer DDR5 hardware.