MSI Gaming Vector GP68HX 13VG-087BE RAM upgrade specifications

MSI Vector GP68HX 13VG-087BE MSI Vector GP68HX 13VG-087BE MSI Vector GP68HX 13VG-087BE MSI Vector GP68HX 13VG-087BE MSI Vector GP68HX 13VG-087BE

The MSI Vector GP68HX 13VG-087BE gaming laptop features DDR5-SDRAM memory upgrade specifications with two SO-DIMM slots supporting maximum capacity of 64 GB total RAM. Compatible memory operates at 5600 MHz frequency. The gaming series supports DDR5 memory modules in SO-DIMM form factor for RAM expansion and system memory upgrades on this MSI model.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR5-SDRAM
Frequency5600 MHz
Maximum RAM64 GB
Voltage1.1V
Number of pins262-pin
InterfacePC5
PC Speed RatingPC5-5600 (PC5-44800)
Bandwidth44.8 GB/s
Laptop Release date18 April 2023

Additional Notes

  • The presence of 2 physical SO-DIMM slots implies that reaching the maximum capacity requires a matched pair of 32 GB modules to maintain dual-channel memory bandwidth.
  • Installing memory with higher frequencies than 5600 MHz will result in the system downclocking the modules to match the maximum supported internal bus speed of the MSI Vector GP68HX 13VG-087BE motherboard.
  • Upgrading to the 64 GB limit improves system stability during heavy multitasking and reduces reliance on the slower SSD-based virtual memory swap file.
  • Mixing modules with different CAS latencies or timings will force the memory controller to operate both sticks at the slowest common denominator, potentially increasing system latency.
  • DDR5 architecture integrates on-module Power Management Integrated Circuits which increases heat generation compared to older standards, necessitating adequate thermal contact within the chassis.
  • The 64 GB ceiling indicates a limitation in the BIOS or physical trace routing that prevents the use of high-density 48 GB modules that have recently entered the market.
  • Physical access to the RAM slots for hardware modification typically requires the removal of the entire bottom shroud, which may involve breaking a factory seal depending on regional service policies.