MSI Gaming GS75 8SG-063IT Stealth RAM upgrade specifications
MSI GS75 8SG-063IT Stealth Gaming series laptop RAM upgrade specifications include DDR4-SDRAM memory compatible with 2x SO-DIMM slots. Maximum RAM capacity supported is 32 GB total, with memory operating at 2666 MHz frequency. SO-DIMM form factor modules are required for upgrade compatibility. Current specifications enable memory expansion to meet enhanced performance requirements for gaming and demanding applications.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2666 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2666 (PC4-21328) |
| Bandwidth | 21.3 GB/s |
| Laptop Release date | 16 January 2019 |
Additional Notes
- The motherboard architecture utilizes a dual channel configuration requiring matching modules to maximize memory bandwidth and prevents single channel latency bottlenecks.
- Upgrading the MSI GS75 8SG-063IT Stealth involves navigating a flipped motherboard design which necessitates a total teardown of the internal chassis to access the physical slots.
- Installing modules with frequencies exceeding 2666 MHz results in automatic downclocking to the system bus limit determined by the 8th generation processor architecture.
- Memory expansion is restricted to 16 GB per slot due to chipset addressing limitations found in this thin profile hardware revision.
- Factory thermal pads on the stock memory modules must be replaced or repositioned to maintain heat dissipation for the neighboring VRM components during high load operations.
- Incompatibility arises if high density 1Rx16 modules are used as the controller typically requires 1Rx8 or 2Rx8 organizations for stable boot cycles.
- Physical clearance within the slim casing prohibits the use of SO-DIMM modules with integrated bulky metal heat spreaders.