MSI Gaming GT73EVR 7RF-1025X Titan Pro RAM upgrade specifications
The MSI GT73EVR 7RF-1025X Titan Pro gaming laptop supports DDR4-SDRAM memory upgrades with four SO-DIMM slots. Maximum memory capacity reaches 64 GB total, operating at 2400 MHz frequency. Compatible RAM modules must match the SO-DIMM form factor specifications for proper installation in the available slots. Memory upgrade compatibility requires DDR4-SDRAM specifications matching the laptop's designated frequency and slot configuration.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 4x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2400 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2400 (PC4-19200) |
| Bandwidth | 19.2 GB/s |
| Laptop Release date | 13 January 2018 |
Additional Notes
- The presence of 4 SO-DIMM slots implies a dual-channel architecture requiring identical pairs of modules to maximize memory bandwidth and prevent latency mismatches.
- The MSI GT73EVR 7RF-1025X Titan Pro physical chassis configuration typically places 2 memory slots on the underside of the motherboard, necessitating the removal of the cooling assembly and internal shield for a full 64 GB saturation.
- Utilizing modules with higher frequencies than 2400 MHz results in automatic downclocking to match the integrated memory controller limit of the 7th Generation processor architecture.
- Populating all 4 slots increases the thermal load on the internal motherboard components due to the proximity of the volatile memory to the heat pipes of the GPU and CPU.
- Mixing memory densities across the 4 slots can disable dual-channel interleaving, leading to a reduction in effective data throughput during memory-intensive gaming or rendering tasks.
- The 64 GB ceiling is restricted by the BIOS addressable space and the maximum density of 16 GB per individual SO-DIMM module available for this chipset generation.
- Accessing the secondary pair of slots requires careful navigation of factory warranty seals which may be located over the primary chassis screws or internal component brackets.