MSI Katana 11UD-835FR RAM upgrade specifications

MSI Katana GF66 11UD-835FR laptop memory upgrade specifications include two SO-DIMM slots supporting DDR4-SDRAM memory modules. Maximum RAM capacity reaches 64 GB total. Compatible memory operates at 3200 MHz frequency. Upgrade options utilize SO-DIMM form factor modules. Specifications define memory configuration and compatible RAM types for this Katana GF66 model.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR4-SDRAM
Frequency3200 MHz
Maximum RAM64 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-3200 (PC4-25600)
Bandwidth25.6 GB/s
Laptop Release date04 August 2021

Additional Notes

  • The MSI Katana 11UD-835FR contains 2 SO-DIMM slots, which means maximum capacity requires both slots to be populated; adding a single module leaves one slot unutilized and prevents reaching the 64 GB ceiling.
  • DDR4-3200 memory operates at a fixed frequency; mixing modules with different speeds will downclock to the slowest module's rating, creating performance loss if higher-frequency DDR4 is installed alongside the existing memory.
  • SO-DIMM form factor is mechanically incompatible with standard UDIMM modules; only laptop-grade SO-DIMM sticks will physically fit into the 2 available slots.
  • Upgrading beyond the installed capacity requires removing and replacing existing modules rather than adding modules to vacant slots; this creates a disposal decision for the original memory hardware.
  • DDR4-3200 is the validated speed ceiling for this model; purchasing DDR4-3600 or faster modules will not deliver rated performance and creates unnecessary cost without functional benefit.
  • The SO-DIMM slot configuration lacks expansion redundancy; a single failed memory module eliminates half the installed capacity until replacement occurs.
  • Warranty implications vary by manufacturer; opening the chassis to access SO-DIMM slots may void coverage depending on MSI's service terms for this unit, requiring verification before installation.