MSI Katana 11UD-836XFR RAM upgrade specifications

MSI Katana GF66 11UD-836XFR laptop features DDR4-SDRAM memory upgrade specifications with two SO-DIMM slots supporting maximum capacity of 64 GB. Compatible memory modules operate at 3200 MHz frequency. Upgrade specifications include DDR4 SO-DIMM form factor modules. Maximum RAM capacity reaches 64 GB total when utilizing both available memory slots. Memory specifications enable hardware upgrades for enhanced multitasking performance and application compatibility on MSI GF66 11UD-836XFR systems.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR4-SDRAM
Frequency3200 MHz
Maximum RAM64 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-3200 (PC4-25600)
Bandwidth25.6 GB/s
Laptop Release date31 July 2021

Additional Notes

  • DDR4 memory bus operates at lower bandwidth compared to DDR5 alternatives, resulting in reduced memory throughput for applications requiring high-speed data transfer between CPU and RAM.
  • The 2 SO-DIMM slot configuration on the MSI Katana 11UD-836XFR means both memory modules must be installed to achieve maximum capacity; removal of either module reduces total addressable memory.
  • SO-DIMM form factor requires low-profile memory modules; standard UDIMM RAM modules will not physically fit into the available slots regardless of frequency compatibility.
  • Memory frequency capped at 3200 MHz constrains CPU-memory synchronization speed; upgrade modules exceeding this specification will downclock to 3200 MHz, negating performance gains from higher-rated RAM.
  • Single-channel configuration results if only 1 module occupies the 2-slot array, cutting memory bandwidth by approximately 50% compared to dual-channel operation and degrading gaming and multithreaded workload performance.
  • Upgrading to 64 GB total requires dual 32 GB SO-DIMM modules; availability of 32 GB laptop memory modules remains limited and commands significant cost premium relative to desktop equivalents.
  • DDR4-3200 modules sourced for upgrade purposes must carry SO-DIMM certification; consumer-grade desktop DDR4 modules are mechanically and electrically incompatible despite identical frequency ratings.