MSI Modern 14 B10RASW-079 RAM upgrade specifications

MSI 14 B10RASW-079 MSI 14 B10RASW-079 MSI 14 B10RASW-079 MSI 14 B10RASW-079 MSI 14 B10RASW-079

The MSI Modern 14 B10RASW-079 laptop features one SO-DIMM memory slot supporting DDR4-SDRAM upgrades at 2666 MHz frequency. Maximum RAM capacity reaches 32 GB through compatible SO-DIMM modules. Current upgrade specifications enable users to expand memory from baseline configurations to the maximum 32 GB threshold. The single slot configuration requires replacement of existing modules rather than supplementary additions for capacity expansion. DDR4-SDRAM compatibility ensures specifications align with Modern 14 series design parameters.

Memory Upgrade Specifications

SpecificationValue
Memory slots1x SO-DIMM
Form factorSO-DIMM
Memory typeDDR4-SDRAM
Frequency2666 MHz
Maximum RAM32 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-2666 (PC4-21328)
Bandwidth21.3 GB/s
Laptop Release date22 April 2021

Additional Notes

  • The single SO-DIMM configuration prevents dual-channel memory operation, limiting memory bandwidth to approximately 21.3 GB/s compared to the 42.6 GB/s available in comparable dual-channel systems.
  • DDR4-2666 represents the JEDEC standard speed for 10th generation Intel mobile processors, operating at 1.2V with CAS latencies typically between CL17 and CL19.
  • Installation requires accessing the bottom panel of the MSI Modern 14 B10RASW-079, which may involve removing between 8 and 12 retention screws depending on chassis revision.
  • The 32 GB maximum capacity necessitates a single-stick solution, as no higher-density SO-DIMM module exists for this specification at standard voltages.
  • Memory modules rated above 2666 MHz will automatically downclock to match the 2666 MHz frequency ceiling, making higher-speed purchases economically inefficient unless pricing is equivalent.
  • The solitary slot architecture means capacity upgrades require complete replacement of the existing module rather than supplemental installation.
  • ECC SO-DIMM modules are physically compatible but will operate in non-ECC mode, as mobile consumer chipsets lack error-correction support.
  • DDR4-2666 modules manufactured after 2019 typically use single-rank or dual-rank configurations at 16 GB density, with dual-rank offering marginally better performance in single-channel scenarios.
  • Temperature tolerances for SO-DIMM modules range from 0°C to 85°C during operation, though thermal throttling in compact 14-inch chassis typically begins above 75°C under sustained loads.
  • Non-standard voltage modules requiring 1.35V or higher will either fail POST initialization or force the system into compatibility mode with reduced stability.