MSI Modern A10RAS-080FR RAM upgrade specifications
MSI A10RAS-080FR Modern Series 15 laptop supports DDR4-SDRAM memory upgrades with two SO-DIMM slots. Maximum compatible RAM capacity reaches 64 GB total. Memory specifications include 2666 MHz frequency support. Upgrade options accommodate SO-DIMM form factor modules. Current and additional memory modules must meet DDR4 specifications for compatibility with this model.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2666 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2666 (PC4-21328) |
| Bandwidth | 21.3 GB/s |
| Laptop Release date | 19 March 2020 |
Additional Notes
- The presence of 2 physical SO-DIMM slots allows for dual-channel memory configurations which increase memory bandwidth compared to single-channel setups.
- Upgrading the MSI Modern A10RAS-080FR to the 64 GB maximum requires removing any existing pre-installed modules as no memory is permanently soldered to the motherboard.
- Installing modules with frequencies higher than 2666 MHz results in the system automatically downclocking the RAM to match the hardware-coded limit of the processor memory controller.
- The 2666 MHz speed signifies a DDR4 architecture that operates at 1.2V providing better thermal efficiency and lower power consumption compared to older DDR3 standards.
- Accessing the memory slots necessitates the removal of the entire base panel which involves breaking the factory seal and potentially impacting warranty terms depending on regional consumer laws.
- Mismatched capacities between the 2 slots will trigger asynchronous dual-channel mode where only the capacity of the smaller module runs at full optimized speed.
- Latency timings are restricted by the BIOS and using high-performance RAM with aggressive XMP profiles will likely result in the system reverting to standard JEDEC timings.