MSI Prestige PS42 8RB-099CA RAM upgrade specifications

MSI PS42 8RB-099CA MSI PS42 8RB-099CA MSI PS42 8RB-099CA MSI PS42 8RB-099CA MSI PS42 8RB-099CA

The MSI Prestige PS series model PS42 8RB-099CA laptop contains one SO-DIMM memory slot supporting DDR4-SDRAM modules. The upgrade specifications indicate a maximum RAM capacity of 16 GB. Compatible memory modules operate at 2400 MHz frequency. The SO-DIMM form factor represents the physical specifications for memory upgrades on this particular laptop model. Current memory configurations and upgrade capacity are determined by available slots and maximum supported capacity specifications.

Memory Upgrade Specifications

SpecificationValue
Memory slots1x SO-DIMM
Form factorSO-DIMM
Memory typeDDR4-SDRAM
Frequency2400 MHz
Maximum RAM16 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-2400 (PC4-19200)
Bandwidth19.2 GB/s
Laptop Release date19 July 2018

Additional Notes

  • The single slot configuration on the MSI PS42 8RB-099CA necessitates a total module replacement for memory increases rather than adding to existing capacity.
  • Operating in a permanent single channel mode limits memory bandwidth compared to dual channel systems which impacts integrated graphics performance and heavy multitasking.
  • The hardware architecture enforces a rigid ceiling at 16 GB because the chipset or BIOS cannot address higher density sticks like 32 GB modules.
  • Installing memory with frequencies exceeding 2400 MHz results in automatic downclocking to match the system bus speed limit.
  • Accessing the SO-DIMM slot requires careful chassis disassembly which typically involves removing the entire bottom panel and potentially exposing sensitive internal components.
  • Latency performance depends entirely on the CAS timing of the lone module installed since there is no secondary stick to synchronize with.
  • Upgrading to the maximum supported capacity is the only method to mitigate paging file reliance on the primary storage drive during high load scenarios.