MSI Prestige PS42 8RB-204RU RAM upgrade specifications
MSI Prestige PS42 8RB-204RU upgrade specifications indicate DDR4-SDRAM memory compatibility with single SO-DIMM slot configuration. Maximum RAM capacity reaches 16 GB, with operational frequency at 2400 MHz. Compatible memory modules must match SO-DIMM form factor specifications for proper installation and system functionality on the PS series model.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 1x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2400 MHz |
| Maximum RAM | 16 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2400 (PC4-19200) |
| Bandwidth | 19.2 GB/s |
| Laptop Release date | 03 October 2018 |
Additional Notes
- The presence of a single SO-DIMM slot on the MSI PS42 8RB-204RU necessitates a full replacement of the existing module to facilitate any increase in capacity.
- The hardware architecture operates exclusively in single channel mode because only 1 physical memory slot exists on the motherboard.
- Memory bandwidth is restricted to half the potential theoretical throughput compared to dual channel systems which impacts integrated graphics performance and data intensive workloads.
- Upgrading beyond the 16 GB threshold results in a boot failure or system instability due to motherboard firmware and processor limit constraints.
- Utilizing modules with higher frequencies than 2400 MHz results in automatic downclocking to match the native speed supported by the memory controller.
- Internal access for memory replacement requires removing the entire lower chassis cover which carries the potential for damaging fragile plastic clips or violating factory seal stickers.
- The 260 pin physical interface ensures compatibility with standard DDR4 mobile modules while precluding the use of older DDR3 or newer DDR5 hardware.