MSI Workstation WS65 9TL-816ES RAM upgrade specifications
The MSI WS65 9TL-816ES workstation series supports DDR4-SDRAM memory upgrades through two SO-DIMM slots. The laptop specifications permit maximum RAM capacity of 64 GB, with compatible memory operating at 2666 MHz frequency. Users can upgrade the existing memory configuration using SO-DIMM form factor modules. The specifications define the compatible memory parameters for expanding the WSS65 9TL-816ES workstation's memory capacity.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2666 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2666 (PC4-21328) |
| Bandwidth | 21.3 GB/s |
| Laptop Release date | 05 October 2019 |
Additional Notes
- The dual slot configuration requires removing the factory modules to reach the maximum supported capacity of 64 GB.
- The MSI WS65 9TL-816ES motherboard architecture utilizes dual channel bandwidth which only activates when two identical modules are installed.
- Installing memory with higher clock speeds results in automatic downclocking to the 2666 MHz system bus limitation.
- Internal access to the SO-DIMM slots typically involves a flipped motherboard design that requires full disassembly of the thermal cooling assembly.
- The SODIMM form factor necessitates the use of unbuffered non-ECC modules to ensure BIOS POST compatibility.
- Upgrading memory modules does not void the hardware warranty provided the factory seal is broken without causing physical damage to internal components.
- Latency performance depends on the CAS timing of the secondary market modules matching the system firmware profiles.