MSI Workstation WS76 11UM-444 RAM upgrade specifications
The MSI WS76 11UM-444 workstation features DDR4-SDRAM memory upgrade specifications with two SO-DIMM slots supporting maximum capacity of 64 GB RAM. Compatible memory modules operate at 3200 MHz frequency. The WS76 series workstation supports SO-DIMM form factor modules for memory expansion. Upgrade specifications enable users to enhance system performance through additional RAM installation in available slots, with each slot accommodating compatible DDR4 modules up to the maximum supported capacity.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 21 October 2021 |
Additional Notes
- The dual slot configuration requires a symmetrical pair of 32 GB modules to achieve the maximum memory capacity.
- The MSI WS76 11UM-444 relies on unbuffered non-ECC memory which limits error correction capabilities during intensive rendering tasks.
- Installing a single module will force the system into single channel mode and significantly reduce memory bandwidth for bandwidth dependent workstation applications.
- Storage controllers and the processor chipset will downclock any modules rated above 3200 MHz to match the motherboard speed limit.
- Accessing the SO-DIMM slots requires the removal of the entire base panel which involves navigating delicate internal ribbon cables and plastic clips.
- Matching the CAS latency and voltage across both slots is necessary to maintain system stability and prevent boot failures.
- Replacing factory installed RAM may involve piercing a factory seal sticker which varies by region regarding warranty enforcement.