ACER TravelMate P259-G2-M-59S4 RAM upgrade specifications
ACER TravelMate P2 series model P259-G2-M-59S4 supports DDR4-SDRAM memory upgrades. The laptop features 2x SO-DIMM memory slots with a maximum RAM capacity of 32 GB. Memory specifications include DDR4 modules operating at 2133 MHz frequency. Compatible upgrades utilize standard SO-DIMM form factor modules, enabling users to expand system memory from baseline configurations up to the maximum supported capacity of 32 GB total RAM.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2133 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2133 (PC4-17064) |
| Bandwidth | 17.1 GB/s |
| Laptop Release date | 10 August 2017 |
Additional Notes
- Dual channel memory architecture is achievable only through the installation of 2 identical capacity modules to maximize the integrated graphics throughput.
- The 32 GB ceiling necessitates the use of high density 16 GB modules which are only compatible if the firmware supports the specific ranks and density of the DRAM chips.
- Installing memory with frequencies exceeding 2133 MHz results in automatic downclocking to the system bus limit since the chipset does not support XMP or higher native clock speeds.
- The SO-DIMM form factor implies a 260 pin physical interface which is incompatible with older DDR3 or desktop DIMM hardware.
- Populating only 1 of the 2 available slots creates a single channel bandwidth bottleneck that degrades multitasking efficiency during memory intensive operations.
- Thermal constraints within the compact chassis suggest that memory modules with tall integrated heat spreaders may interfere with the bottom casing closure.
- Latency timings are governed by the slowest installed module if mismatched sticks are utilized in the 2 available slots.
- System stability depends on using 1.2V low voltage modules as the motherboard remains tuned for standard DDR4 voltage signatures.