ASUS ASUSPRO P1440FA-FQ2137 RAM upgrade specifications
The ASUS ASUSPRO P series P1440FA-FQ2137 laptop features DDR4-SDRAM memory upgrade capabilities. The system contains 1x SO-DIMM slot for memory expansion, with maximum supported RAM capacity of 20 GB. The memory operates at 2400 MHz frequency. Upgrade specifications indicate on-board memory combined with SO-DIMM form factor compatibility. Technicians can expand the laptop's memory by installing compatible DDR4-SDRAM modules in the available slot to maximize performance within the specified capacity limits.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 1x SO-DIMM |
| Form factor | On-board + SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2400 MHz |
| Maximum RAM | 20 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2400 (PC4-19200) |
| Bandwidth | 19.2 GB/s |
| Laptop Release date | 25 September 2020 |
Additional Notes
- The presence of on-board memory means a portion of the system RAM is non-removable and soldered directly to the motherboard.
- The ASUS P1440FA-FQ2137 employs a combined memory architecture where only 1 module can be swapped or added to increase capacity.
- Physical expansion is limited by the single SO-DIMM slot which necessitates replacing the existing module rather than adding a second one.
- Higher frequency RAM modules will automatically downclock to match the 2400 MHz ceiling dictated by the system bus.
- Dual-channel performance modes are restricted to the capacity of the soldered chip plus an equivalent amount on the expansion module.
- The 20 GB maximum limit indicates a configuration of 4 GB integrated memory paired with a 16 GB expansion module.
- Latency timings on the expansion module should match the soldered memory specifications to prevent stability issues or POST failures.
- Internal access for memory installation requires removal of the base panel which may involve breaking factory seals depending on regional warranty policies.