ASUS ASUSPRO P2540FB-DM0095R RAM upgrade specifications
ASUS ASUSPRO P series model P2540FB-DM0095R contains DDR4-SDRAM memory configuration with one SO-DIMM slot available for upgrade. The laptop specifications indicate maximum RAM capacity of 20 GB total, combining on-board memory with expandable SO-DIMM slot. Compatible memory modules operate at 2400 MHz frequency. RAM upgrade options are limited to single slot expansion, allowing users to increase system memory through compatible DDR4 SO-DIMM modules within manufacturer specifications.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 1x SO-DIMM |
| Form factor | On-board + SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2400 MHz |
| Maximum RAM | 20 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2400 (PC4-19200) |
| Bandwidth | 19.2 GB/s |
| Laptop Release date | 02 May 2019 |
Additional Notes
- The ASUS ASUSPRO P2540FB-DM0095R contains 1 soldered memory chip and 1 upgradeable slot, meaning maximum expansion reaches 20 GB total, not through dual-slot configurations typical of larger workstations.
- DDR4-2400 MHz specification indicates this platform predates DDR4-2666 and DDR4-3200 standards; higher-frequency SO-DIMM modules will operate at 2400 MHz native speed due to BIOS lock, eliminating performance gains from newer memory stock.
- The single SO-DIMM slot creates a capacity ceiling; adding a 16 GB module achieves maximum configuration, but any future refresh beyond 20 GB total requires motherboard replacement rather than slot addition.
- SO-DIMM form factor constrains module availability to laptop-grade memory; enterprise-grade ECC variants remain limited, affecting reliability options for sustained workloads versus consumer DDR4 SO-DIMM inventory.
- Soldered on-board memory cannot be recovered or reallocated; upgrade paths require retention of the factory chip plus SO-DIMM addition, creating fixed overhead that reduces net usable expansion benefit compared to fully socketed platforms.
- DDR4-2400 timing and voltage specifications lock compatible SO-DIMM to 1.2V standard; modules rated for 1.35V low-voltage variants may operate at degraded stability or require BIOS override, risking warranty void conditions.