ASUS ROG G513QR-HF012T RAM upgrade specifications
The ASUS ROG Strix G15 G513QR-HF012T features DDR4-SDRAM memory upgradeable through two SO-DIMM slots. Maximum supported capacity reaches 32 GB total. Compatible memory operates at 3200 MHz frequency. Specifications indicate upgrade potential via standard SO-DIMM form factor modules. The laptop accommodates memory expansion to achieve maximum RAM configuration of 32 GB.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 16 December 2020 |
Additional Notes
- The ASUS ROG G513QR-HF012T accommodates a maximum of 32 GB across 2 SO-DIMM slots, meaning each slot accepts a single 16 GB module at full capacity. Installing mismatched capacities (e.g., 8 GB + 16 GB) results in operational asymmetry without performance penalties but reduces upgrade flexibility for future configurations.
- DDR4-3200 MHz memory represents the native speed tier for this platform. Third-party modules rated above 3200 MHz will downclock to 3200 MHz unless BIOS overclocking profiles are enabled, which may void standard warranty coverage for memory-related failures.
- SO-DIMM form factor restricts replacement options to laptop-grade modules only. Desktop DDR4 DIMMs are physically incompatible with the slot geometry and cannot be force-fitted without permanent damage to the retention clips or module pins.
- The 2-slot architecture creates a single point of failure risk. A defective SO-DIMM socket cannot be bypassed or repaired through firmware; the entire motherboard assembly requires replacement under warranty if both slots become inaccessible.
- Thermal constraints in mobile chassis may require low-profile or passive heat-spreader modules rather than tall aluminum heatsinks. Modules exceeding standard SO-DIMM height specifications risk contact with internal components during installation or normal thermal cycling.
- Upgrading from factory configuration to 32 GB requires purchasing a 2x 16 GB kit rather than individual modules, as single 16 GB SO-DIMMs are significantly less available in retail channels than matched pairs, affecting both lead time and pricing.