ASUS ROG G614JV RAM upgrade specifications
ASUS ROG Strix G16 G614JV memory upgrade specifications include two SO-DIMM slots compatible with DDR5-SDRAM modules operating at 4800 MHz frequency. The laptop supports a maximum RAM capacity of 32 GB, enabling users to expand the system memory for enhanced multitasking and gaming performance. Upgrade options allow installation of DDR5 memory modules in either or both available slots to reach the specified maximum capacity. Compatible memory configurations include single or dual module installations within the 32 GB limit.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR5-SDRAM |
| Frequency | 4800 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.1V |
| Number of pins | 262-pin |
| Interface | PC5 |
| PC Speed Rating | PC5-4800 (PC5-38400) |
| Bandwidth | 38.4 GB/s |
Additional Notes
- Dual channel mode is only achievable by installing identical modules in both SO-DIMM slots to prevent memory bandwidth throttling during intensive tasks.
- The processor memory controller limits the maximum addressable space to 32 GB regardless of higher capacity modules being physically compatible with the slots.
- Installing modules with frequencies exceeding 4800 MHz results in automatic downclocking to meet the hardware latency floor of the ASUS ROG G614JV architecture.
- Physical access to the memory slots requires removal of the bottom chassis panel which involves managing internal ribbon cables for integrated lighting components.
- The reliance on DDR5-SDRAM architecture necessitates specific 262-pin modules as older DDR4 hardware is physically keyed differently and will not fit the motherboard.
- Firmware limitations on this specific model prevent XMP or manual timing adjustments in the BIOS for aftermarket memory kits.
- Thermal overhead for the system remains stable when using standard 1.1 volt modules but can be impacted by high performance kits requiring custom heat spreaders that exceed vertical clearance limits.