ASUS ROG G614JVR-N4005W RAM upgrade specifications
ASUS ROG Strix G16 G614JVR-N4005W memory upgrade specifications feature DDR5-SDRAM technology with dual SO-DIMM slots supporting maximum RAM capacity of 32 GB. Compatible DDR5 modules operate at 5600 MHz frequency. The SO-DIMM form factor enables RAM upgrades within the specified memory slots. Specifications indicate maximum upgrade potential and compatible memory configurations for this laptop model.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR5-SDRAM |
| Frequency | 5600 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.1V |
| Number of pins | 262-pin |
| Interface | PC5 |
| PC Speed Rating | PC5-5600 (PC5-44800) |
| Bandwidth | 44.8 GB/s |
Additional Notes
- The presence of 2 SO-DIMM slots allows for dual-channel memory architecture, which doubles the communication bandwidth between the processor and the system memory compared to single-channel configurations.
- Upgrading the memory beyond the supported 32 GB threshold will likely result in a failure to post or system instability due to firmware-level addressing limitations.
- The ASUS ROG G614JVR-N4005W utilizes a SODIMM form factor which necessitates the use of small-outline modules specifically designed for compact clearances in high-performance chassis.
- Installing modules with higher clock speeds will result in the system downclocking the RAM to 5600 MHz to maintain signal integrity and motherboard compatibility.
- The transition to DDR5 technology introduces on-die Error Correction Code which enhances data reliability during intense computational workloads without the need for external parity bits.
- Matching the capacity and density of modules in both slots is required to ensure consistent latency and prevent the system from falling back to asynchronous memory modes.
- Accessing the internal memory slots typically requires the removal of the bottom panel, which must be performed without damaging the thermal pads or integrated cooling components to maintain factory thermal performance.