ASUS ROG G815LW-S9179W RAM upgrade specifications

ASUS G815LW-S9179W ASUS G815LW-S9179W ASUS G815LW-S9179W ASUS G815LW-S9179W

The ASUS ROG Strix G18 G815LW-S9179W laptop features two SO-DIMM slots supporting DDR5-SDRAM memory modules. The specifications indicate maximum RAM capacity of 64 GB, with compatible memory operating at 5600 MHz frequency. The upgrade configuration allows for flexible memory expansion using SO-DIMM form factor modules, enabling users to enhance system performance through RAM upgrades on the ASUS ROG Strix G18 series.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR5-SDRAM
Frequency5600 MHz
Maximum RAM64 GB
Voltage1.1V
Number of pins262-pin
InterfacePC5
PC Speed RatingPC5-5600 (PC5-44800)
Bandwidth44.8 GB/s

Additional Notes

  • The presence of 2 SO-DIMM slots implies that reaching the maximum capacity requires the replacement of all existing modules rather than adding to them.
  • Utilizing two matching memory modules is necessary to enable dual-channel bandwidth, which significantly impacts integrated graphics performance and CPU-intensive task processing speeds.
  • The DDR5 architecture incorporates on-die ECC and power management integrated circuits that increase thermal output compared to older memory standards, requiring adequate internal airflow during heavy workloads.
  • Mixing modules with different timings or ranks may force the internal memory controller to downclock to a lower frequency to maintain system stability.
  • The ASUS ROG G815LW-S9179W motherboard firmware strictly dictates the supported voltage profiles, meaning high-performance modules requiring manual XMP adjustments might not achieve rated speeds without BIOS compatibility.
  • Physical installation of 64 GB kits involves high-density DRAM chips that may require a BIOS update to be correctly recognized by the system at boot.
  • Internal access to the memory slots typically involves removing the bottom chassis panel, which may be secured by screws of varying lengths requiring specific torque to avoid damaging the palm rest assembly.