ASUS ROG GL702VM-BA230T RAM upgrade specifications
The ASUS ROG Strix GL702VM-BA230T features two SO-DIMM slots for DDR4-SDRAM memory upgrades. The laptop supports maximum RAM capacity of 32 GB total, with compatible memory operating at 2400 MHz frequency. Each slot accepts SO-DIMM form factor modules, enabling users to upgrade from factory-installed memory to higher capacities. Specifications indicate the GL702VM-BA230T accommodates DDR4 memory modules, supporting dual-channel configuration for enhanced performance in gaming and multimedia applications.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2400 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2400 (PC4-19200) |
| Bandwidth | 19.2 GB/s |
| Laptop Release date | 28 September 2017 |
Additional Notes
- The 2 SO-DIMM slot configuration requires paired module replacement rather than incremental additions when upgrading from factory configuration, as both slots are typically populated in gaming laptops.
- The 32 GB maximum capacity implies a 16 GB per slot ceiling, preventing the use of higher-density 32 GB SO-DIMM modules regardless of market availability.
- DDR4-2400 represents the locked memory frequency ceiling enforced by the chipset or BIOS, meaning faster DDR4-2666 or DDR4-3200 modules will downclock to 2400 MHz without performance benefit.
- The SO-DIMM form factor restriction eliminates compatibility with standard desktop DIMM modules despite identical DDR4 technology, as the physical notch positioning and pin count differ.
- Dual-channel bandwidth architecture requires matched module pairs for optimal performance, as mismatched capacities or speeds force the memory controller to operate in asymmetric or single-channel mode.
- The absence of ECC support in consumer DDR4-SDRAM specification means error-correcting code modules will either fail POST or operate in non-ECC mode if physically compatible.
- Voltage standardization at 1.2V for DDR4 SO-DIMM eliminates low-voltage variant considerations that existed in DDR3L transitions, simplifying module selection.
- The 260-pin SO-DIMM interface prevents installation of older 204-pin DDR3 SO-DIMM modules despite similar physical dimensions, as the notch placement differs by design.
- The chipset-limited 2400 MHz frequency eliminates potential performance gains from XMP-profiled gaming memory kits marketed at higher speeds for desktop platforms.
- Module access likely requires complete bottom panel removal rather than dedicated access door, based on ROG Strix chassis design patterns from this generation.