ASUS ROG GL704GW-PS74 RAM upgrade specifications
The ASUS ROG Strix GL704GW-PS74 gaming laptop features DDR4-SDRAM memory upgrade specifications with two SO-DIMM slots supporting maximum capacity of 32 GB total RAM. Compatible memory modules operate at 2666 MHz frequency. The upgrade slots accommodate standard SO-DIMM form factor memory modules, enabling users to expand the system's memory capacity beyond factory-installed configurations. Current memory specifications and compatible module details are provided for accurate upgrade planning on the GL704GW-PS74 model.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2666 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2666 (PC4-21328) |
| Bandwidth | 21.3 GB/s |
| Laptop Release date | 03 February 2019 |
Additional Notes
- The ASUS ROG GL704GW-PS74 has reached its architectural ceiling at 32 GB total capacity; any memory upgrade beyond this threshold requires system replacement rather than component substitution.
- SO-DIMM slots occupy limited physical space beneath the keyboard assembly, creating potential access difficulties during installation that may necessitate partial disassembly of the palmrest area.
- DDR4-2666 MHz operates at a frequency ceiling below contemporary 3200 MHz standards, meaning newer memory modules will downclock to 2666 MHz compatibility, preventing performance gains from higher-speed purchases.
- Dual-slot configuration creates a single-upgrade constraint; users with 1x16 GB existing modules cannot add capacity without replacing at least one populated DIMM, as mismatched 8/16 GB pairing introduces latency asymmetry across the memory bus.
- SO-DIMM retention mechanisms use friction-clip rather than latch-based ejection, increasing risk of module retention failures during removal if pressure is applied at incorrect angles.
- Memory frequency locked to 2666 MHz indicates no BIOS-level overclocking provisions for DDR4 speeds, eliminating bandwidth expansion through firmware configuration.
- Factory specification compliance restricts warranty coverage to DDR4 SO-DIMM modules rated for 2666 MHz operation; third-party modules rated above this frequency may trigger warranty voidance claims if system instability occurs.