ASUS TUF Dash FX516PM-HN023T RAM upgrade specifications
The ASUS TUF Dash F15 FX516PM-HN023T supports DDR4-SDRAM memory upgrades with a maximum capacity of 32 GB. The laptop features one SO-DIMM slot for expansion, operating at 3200 MHz frequency. Memory configuration consists of on-board components plus one replaceable SO-DIMM module. Compatible RAM upgrades are limited to single SO-DIMM installation on the FX516PM-HN023T model, with specifications matching DDR4-SDRAM standards at 3200 MHz for optimal compatibility and system performance.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 1x SO-DIMM |
| Form factor | On-board + SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 25 January 2021 |
Additional Notes
- The presence of on-board memory means that total system bandwidth relies on matching the speed and timings of the soldered module to maintain dual-channel performance.
- Upgrading the single available SO-DIMM slot on this ASUS TUF Dash FX516PM-HN023T requires a module that supports 1.2V operation to ensure compatibility with standard DDR4 power delivery.
- Failure to match the 3200 MHz frequency will result in the entire memory controller downclocking to the speed of the slowest module, creating a throughput bottleneck.
- Asynchrony in capacity between the soldered memory and the expansion slot will cause the system to operate in flex mode, where only the matched portion of the RAM runs at dual-channel speeds.
- Accessing the internal hardware for installation necessitates the removal of the bottom chassis cover, which requires a non-marring pry tool to avoid damaging the plastic clips.
- The 32 GB maximum limit is restricted by the density of high-capacity SO-DIMM modules compatible with the existing soldered configuration.
- Installing a module with higher latency than the factory-soldered chips will force the system to adopt slower timing parameters for stability.