ASUS TUF Gaming FA507NU-LP103W-GAMING RAM upgrade specifications
The ASUS TUF Gaming A15 FA507NU-LP103W-GAMING laptop features DDR5-SDRAM memory upgrade specifications. The system contains 2x SO-DIMM slots compatible with DDR5 modules operating at 4800 MHz. Maximum RAM capacity reaches 32 GB, allowing for significant memory upgrades. The SO-DIMM form factor designates this machine as a portable gaming device. DDR5 memory technology provides enhanced bandwidth and performance compared to previous generation standards. Upgrade compatibility requires DDR5-4800 specifications for optimal performance within the TUF Gaming A15 series architecture.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR5-SDRAM |
| Frequency | 4800 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.1V |
| Number of pins | 262-pin |
| Interface | PC5 |
| PC Speed Rating | PC5-4800 (PC5-38400) |
| Bandwidth | 38.4 GB/s |
Additional Notes
- The mechanical layout of the ASUS FA507NU-LP103W-GAMING dictates that reaching the maximum memory threshold requires the removal of all factory modules because no permanent onboard memory exists.
- Utilizing two identical modules enables a dual channel configuration which effectively doubles the available memory bandwidth for the integrated graphics processor and CPU intensive tasks.
- The specified frequency indicates a voltage requirement of 1.1V per module which minimizes thermal output compared to older generations while requiring specific DDR5 compatible firmware.
- Accessing the SO-DIMM slots involves removing the base panel and potentially dealing with captive screws or delicate plastic clips that must remain intact to preserve the chassis integrity.
- Installing modules with lower latency timings or higher rated speeds will result in the system downclocking the hardware to the hard coded 4800 MHz platform limit.
- The presence of two physical slots allows for asymmetrical capacity configurations such as 8 GB and 16 GB pairings though this results in a partial loss of synchronous data transfer efficiency.
- Standard height SO-DIMM modules are necessary to ensure the bottom cover fits without applying pressure to the motherboard or interfering with the internal cooling solution.