ASUS TUF Gaming FA507NV-LP031W RAM upgrade specifications
ASUS TUF Gaming A15 FA507NV-LP031W laptop features two SO-DIMM slots supporting DDR5-SDRAM memory upgrades. Maximum RAM capacity reaches 32 GB total, with compatible modules operating at 4800 MHz frequency. The system specifications accommodate standard SO-DIMM form factor memory modules for expansion and upgrade purposes. Current configuration and available slots allow users to enhance system memory capacity by installing additional or replacement DDR5 RAM modules. Specifications are compatible with DDR5-4800 standard memory technology.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR5-SDRAM |
| Frequency | 4800 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.1V |
| Number of pins | 262-pin |
| Interface | PC5 |
| PC Speed Rating | PC5-4800 (PC5-38400) |
| Bandwidth | 38.4 GB/s |
| Laptop Release date | 09 February 2023 |
Additional Notes
- The presence of 2 SO-DIMM slots allows for a dual-channel memory configuration which significantly increases bandwidth for integrated graphics and CPU-bound gaming tasks compared to single-channel setups.
- The ASUS TUF Gaming FA507NV-LP031W utilizes a DDR5 architecture that operates at a higher base voltage efficiency than previous DDR4 generations but lacks backward compatibility with older memory modules.
- Upgrading to the 32 GB maximum capacity requires the replacement of existing modules if both slots are currently occupied by lower-capacity sticks.
- Memory modules exceeding the 4800 MHz frequency will be automatically downclocked by the BIOS to match the system bus limitations.
- Physical installation of new hardware requires a non-conductive pry tool to release the plastic clips of the chassis bottom cover without causing structural damage.
- Internal components remain sensitive to static discharge during the upgrade process requiring the use of an anti-static wrist strap or grounding to prevent motherboard failure.
- Latency performance depends on the CAS latency rating of the chosen modules where higher CL timings may slightly offset the data transfer advantages of the 4800 MHz clock speed.
- Non-ECC unbuffered memory is the only compatible module type for this specific consumer-grade firmware environment.