ASUS TUF Gaming FX506LU-HN110T-BE RAM upgrade specifications

ASUS FX506LU-HN110T-BE ASUS FX506LU-HN110T-BE ASUS FX506LU-HN110T-BE ASUS FX506LU-HN110T-BE ASUS FX506LU-HN110T-BE

ASUS TUF Gaming FX506LU-HN110T-BE specifications support DDR4-SDRAM memory upgrades. The laptop contains two SO-DIMM slots for RAM installation. Maximum supported memory capacity reaches 32 GB total. Compatible memory operates at 3200 MHz frequency. Current upgrade specifications indicate SO-DIMM form factor modules are required for this gaming laptop model.

Memory Upgrade Specifications

SpecificationValue
Memory slots2x SO-DIMM
Form factorSO-DIMM
Memory typeDDR4-SDRAM
Frequency3200 MHz
Maximum RAM32 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-3200 (PC4-25600)
Bandwidth25.6 GB/s
Laptop Release date13 January 2021

Additional Notes

  • The ASUS TUF Gaming FX506LU-HN110T-BE operates with a dual-channel memory architecture, meaning both SO-DIMM slots must be populated to achieve rated bandwidth performance; a single module will operate in single-channel mode and reduce memory throughput by approximately 50 percent.
  • DDR4-3200 MHz represents the JEDEC standard for this platform, but compatibility extends to lower-frequency DDR4 modules; however, mixing different speeds forces both slots to downclock to the slower module's rating, creating a performance penalty if mismatched.
  • The 32 GB ceiling constrains upgrades to either two 16 GB modules or retention of one factory module paired with a 16 GB replacement; the firmware will not recognize capacities beyond this limit regardless of module quantity.
  • SO-DIMM form factor requires laptop-specific memory; standard desktop DDR4 modules cannot physically fit into these slots, restricting compatible products to a narrower inventory than desktop RAM options.
  • Lattency-sensitive workloads such as gaming and real-time rendering may exhibit performance sensitivity to memory speed variations; upgrading from stock configurations to higher-frequency DDR4 modules (within the 3200 MHz ceiling) will not unlock additional performance gains, as the controller operates at a fixed frequency.
  • Warranty implications depend on manufacturer policy; most OEM warranties remain valid when replacing RAM with specifications matching or not exceeding the maximum rating, but mixing brands or non-standard timings may void support coverage if hardware failure occurs.