ASUS TUF Gaming FX506LU-HN003T RAM upgrade specifications
ASUS TUF Gaming F15 FX506LU-HN003T laptop features DDR4-SDRAM memory upgrade specifications with 2x SO-DIMM slots supporting maximum capacity of 32 GB RAM. Compatible memory modules operate at 2933 MHz frequency using SO-DIMM form factor. Upgrade specifications enable expansion from factory configuration to maximum supported memory capacity through compatible DDR4 modules installed in available slots.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2933 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2933 (PC4-23464) |
| Bandwidth | 23.5 GB/s |
| Laptop Release date | 13 January 2021 |
Additional Notes
- The ASUS TUF Gaming FX506LU-HN003T accommodates DDR4 SO-DIMM modules exclusively; DDR5 or UDIMM form factors are incompatible with the available slots.
- SO-DIMM modules occupy minimal physical space, requiring only partial internal chassis access through the base cover; full motherboard removal remains unnecessary for installation.
- The 2933 MHz frequency specification indicates this unit operates below contemporary DDR4 standards (3200 MHz+), creating a bandwidth ceiling that may constrain performance gains when pairing with higher-speed compatible modules; the controller will downclock faster memory to match the system baseline.
- The 32 GB capacity ceiling limits configurations to either 2x16 GB dual-channel setups or retention of single populated slots; single-module installations will forfeit dual-channel memory bandwidth benefits.
- SO-DIMM modules require proper seating angle during insertion; misalignment during physical installation is the primary mechanical failure mode in this form factor and remains unrelated to electrical compatibility.
- Upgrading beyond the current memory complement requires removing existing SO-DIMM modules first; both slots cannot operate simultaneously during mixed-generation DDR4 module combinations without potential stability degradation.
- Warranty coverage for RAM upgrades typically remains intact provided modules meet OEM frequency and voltage specifications; operating above 2933 MHz through BIOS overclocking voids memory-related warranty protections on most manufacturers' terms.