ASUS TUF Gaming FX507ZC-HN092W-BE RAM upgrade specifications
ASUS TUF Gaming F15 model FX507ZC-HN092W-BE supports DDR5-SDRAM memory upgrades through two SO-DIMM slots. Maximum RAM capacity reaches 32 GB total. Compatible memory operates at 4800 MHz frequency. Specifications indicate SO-DIMM form factor for memory modules. Upgrade slots accommodate DDR5 technology for enhanced performance. RAM expansion compatible with existing memory configurations on this laptop model.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR5-SDRAM |
| Frequency | 4800 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.1V |
| Number of pins | 262-pin |
| Interface | PC5 |
| PC Speed Rating | PC5-4800 (PC5-38400) |
| Bandwidth | 38.4 GB/s |
| Laptop Release date | 10 January 2022 |
Additional Notes
- The ASUS TUF Gaming FX507ZC-HN092W-BE contains 2 SO-DIMM slots, meaning both slots must be populated simultaneously to achieve rated DDR5 speed; single-slot configurations will operate at lower frequencies or trigger JEDEC fallback modes.
- DDR5-4800 modules represent the native JEDEC standard for this platform; faster aftermarket DDR5 kits (5200+ MHz) will downclock to 4800 MHz unless BIOS overclocking is manually enabled, negating any premium pricing difference.
- The 32 GB maximum addressable capacity means a dual-32GB configuration (64 GB total) cannot be installed, even if physically compatible; upgrade ceiling is fixed at 32 GB paired modules only.
- SO-DIMM form factor requires laptop-specific memory modules; standard desktop DDR5 DIMM sticks are physically incompatible and will not seat in the slot.
- Upgrading from the factory configuration to maximum capacity requires both SO-DIMM slots to be emptied and refilled simultaneously; in-place half-upgrades (adding a second module alongside existing RAM) may introduce dual-rank incompatibilities on certain motherboard BIOS revisions, necessitating stress-testing after installation.
- DDR5 memory operates at 1.1 volts versus DDR4's 1.2 volts; mixing DDR4 modules into DDR5-native slots will cause boot failure and potential hardware detection errors requiring BIOS reset.
- Warranty coverage for memory upgrades typically remains intact when using manufacturer-approved SO-DIMM modules rated for 4800 MHz; third-party overclocked variants may void coverage if POST failure logs indicate non-standard frequency operation.