ASUS Vivobook X412FJ-EB102 RAM upgrade specifications

ASUS X412FJ-EB102 ASUS X412FJ-EB102 ASUS X412FJ-EB102 ASUS X412FJ-EB102 ASUS X412FJ-EB102

ASUS Vivobook 14 X412FJ-EB102 memory upgrade specifications include DDR4-SDRAM compatibility with maximum RAM capacity of 12 GB. The laptop features one SO-DIMM slot for RAM expansion, operating at 2400 MHz frequency. Memory configuration utilizes on-board plus SO-DIMM form factor. Compatible upgrades support DDR4-SDRAM specifications. Maximum upgrade capacity reaches 12 GB total, with specifications conforming to SO-DIMM standards for the Vivobook 14 series.

Memory Upgrade Specifications

SpecificationValue
Memory slots1x SO-DIMM
Form factorOn-board + SO-DIMM
Memory typeDDR4-SDRAM
Frequency2400 MHz
Maximum RAM12 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-2400 (PC4-19200)
Bandwidth19.2 GB/s
Laptop Release date07 August 2019

Additional Notes

  • The ASUS Vivobook X412FJ-EB102 features a hybrid memory architecture with soldered RAM occupying one channel, limiting expansion to a single accessible slot.
  • The 12 GB maximum capacity indicates 4 GB permanently installed on the motherboard, restricting the SO-DIMM slot to an 8 GB module ceiling.
  • Dual-channel operation requires the SO-DIMM module to match the soldered memory speed of 2400 MHz, as mixing frequencies forces both channels to run at the lowest common denominator.
  • Installing a module faster than 2400 MHz provides no performance benefit since the system will downclock it to match the onboard memory specification.
  • Asymmetric memory configurations create a flex mode scenario where only the first 8 GB operates in dual-channel, while any excess runs in slower single-channel mode.
  • The SO-DIMM slot requires DDR4 modules in 260-pin format, incompatible with desktop 288-pin DIMM modules despite sharing the same DDR4 technology.
  • Physical access to the memory slot typically requires bottom panel removal, though the soldered component remains permanently inaccessible for replacement or upgrade.
  • Voltage specifications default to DDR4 standard 1.2V operation, making low-voltage or overclocking-oriented modules functionally identical to standard variants in this system.
  • The non-removable memory component affects warranty service scenarios, as motherboard-level failures necessitate complete board replacement rather than module-only repairs.
  • Memory bandwidth peaks at 38.4 GB/s in dual-channel configuration when properly populated, dropping to 19.2 GB/s if operating in single-channel mode with an empty slot.