ASUS Vivobook D1505YA-MA347W RAM upgrade specifications
ASUS Vivobook 15 OLED series model D1505YA-MA347W features DDR4-SDRAM memory configuration with one SO-DIMM slot available for upgrade. Maximum memory capacity reaches 16 GB through compatible SO-DIMM module installation. The laptop specifications include on-board memory combined with expandable SO-DIMM slot support. DDR4 operating frequency of 3200 MHz ensures compatible memory upgrade performance. Upgrade options utilize standard SO-DIMM form factor modules meeting specifications for this Vivobook 15 OLED model configuration.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 1x SO-DIMM |
| Form factor | On-board + SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 16 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
Additional Notes
- The ASUS Vivobook D1505YA-MA347W combines soldered memory with a single expansion slot, preventing future upgrades to the permanently attached component.
- The 16 GB maximum capacity reflects a limitation imposed either by the chipset architecture or the amount of onboard RAM already installed, restricting total system memory regardless of the SO-DIMM module size inserted.
- Single-channel operation becomes unavoidable if the factory-installed onboard RAM capacity differs from the user-installed SO-DIMM module, reducing memory bandwidth by approximately 50 percent compared to dual-channel configurations.
- DDR4-3200 modules rated above 3200 MHz will downclock to match the supported frequency, wasting the premium paid for higher-speed components.
- Standard voltage DDR4 SO-DIMM modules operating at 1.2V maintain compatibility, while low-voltage variants may cause instability or prevent system POST.
- The single SO-DIMM slot eliminates redundancy, meaning RAM failure in either the soldered or socketed component renders the entire memory subsystem non-functional until replacement.
- Accessing the SO-DIMM slot typically requires bottom panel removal, which may void warranty seals depending on regional service policies and warranty terms.
- Mixing memory brands between the onboard component and the SO-DIMM module introduces potential timing incompatibilities, though JEDEC standard DDR4-3200 specifications minimize this risk.
- Non-ECC unbuffered modules remain the only compatible type for consumer laptop platforms, as registered or error-correcting variants will fail to initialize during boot.
- Thermal constraints in slim laptop chassis may cause DDR4-3200 modules to throttle under sustained memory-intensive workloads, particularly when ambient temperatures exceed 30 degrees Celsius.