ASUS Vivobook S512FA-XB51 RAM upgrade specifications

ASUS S512FA-XB51 ASUS S512FA-XB51 ASUS S512FA-XB51 ASUS S512FA-XB51 ASUS S512FA-XB51

The ASUS Vivobook S15 S512FA-XB51 features DDR4-SDRAM memory configuration with one SO-DIMM slot available for upgrade. The laptop contains onboard memory combined with one replaceable SO-DIMM slot, supporting maximum RAM capacity of 12 GB. Memory specifications include DDR4 technology operating at 2400 MHz frequency. Compatible upgrades utilize SO-DIMM form factor modules. The maximum memory specification and single upgrade slot define the RAM expansion capabilities for the S512FA-XB51 model.

Memory Upgrade Specifications

SpecificationValue
Memory slots1x SO-DIMM
Form factorOn-board + SO-DIMM
Memory typeDDR4-SDRAM
Frequency2400 MHz
Maximum RAM12 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-2400 (PC4-19200)
Bandwidth19.2 GB/s
Laptop Release date17 November 2019

Additional Notes

  • The ASUS Vivobook S512FA-XB51 contains soldered on-board memory paired with a single upgradeable SO-DIMM slot, meaning the base RAM capacity cannot be removed or replaced, only supplemented.
  • Maximum expandable capacity reaches 12 GB total, indicating the on-board portion occupies 8 GB with the SO-DIMM slot accepting only 4 GB modules due to controller or firmware limitations.
  • DDR4-2400 MHz specification predates current DDR4 standard frequencies (3200 MHz and higher), creating compatibility risk when sourcing replacement or upgrade modules, as newer DDR4 stock may operate at incompatible speeds.
  • Single SO-DIMM slot configuration offers no redundancy; removal of the upgradeable module leaves only on-board memory operational, but replacement modules must match the 2400 MHz specification to avoid performance degradation or boot failure.
  • SO-DIMM form factor confinement to 1 slot eliminates any future parallel upgrade pathway; the 12 GB ceiling represents the absolute maximum capacity for the system lifetime.
  • DDR4-2400 speed constraint will create a bandwidth bottleneck if paired with newer processors, as modern CPUs support memory controllers operating at 3200 MHz or higher, forcing the system to downclock to 2400 MHz and reducing multi-threaded workload efficiency.
  • Warranty preservation typically permits SO-DIMM replacement without manufacturer penalty, but on-board memory soldering means any RAM-related hardware failure affecting the base 8 GB requires depot-level board repair outside standard user upgrade scope.