LENOVO IdeaPad IP3 15 I5-1235U 8GB 512GB BLUE RAM upgrade specifications

LENOVO IP3 15 I5-1235U 8GB 512GB BLUE LENOVO IP3 15 I5-1235U 8GB 512GB BLUE LENOVO IP3 15 I5-1235U 8GB 512GB BLUE LENOVO IP3 15 I5-1235U 8GB 512GB BLUE LENOVO IP3 15 I5-1235U 8GB 512GB BLUE

Lenovo IdeaPad 300 Series IP3 15 I5-1235U laptop features one SO-DIMM memory slot for RAM upgrade capability. The system utilizes DDR4-SDRAM memory operating at 3200 MHz frequency. Current configuration includes 8GB capacity with maximum upgrade potential to 16GB RAM. Memory specifications indicate on-board plus SO-DIMM form factor configuration. Compatible upgrade modules must match DDR4-SDRAM specifications and SO-DIMM slot requirements for proper installation. Maximum memory capacity of 16GB represents the upgrade limit for this IdeaPad 300 Series model.

Memory Upgrade Specifications

SpecificationValue
Memory slots1x SO-DIMM
Form factorOn-board + SO-DIMM
Memory typeDDR4-SDRAM
Frequency3200 MHz
Maximum RAM16 GB
Voltage1.2V
Number of pins260-pin
InterfacePC4
PC Speed RatingPC4-3200 (PC4-25600)
Bandwidth25.6 GB/s
Laptop Release date19 February 2022

Additional Notes

  • The Lenovo IdeaPad IP3 15 integrates 8 GB of memory on-board, meaning that capacity cannot be removed or replaced independently. Only the single SO-DIMM slot accepts upgrades.
  • DDR4-SDRAM at 3200 MHz operates at a fixed frequency determined by the platform; installing faster modules will not increase performance, as the controller will downclock to native specifications.
  • The single SO-DIMM slot constrains maximum practical memory to approximately 16 GB, achievable only with an 8 GB module in the available slot, resulting in a dual-channel configuration paired with the on-board 8 GB.
  • Upgrading to 16 GB total RAM will not eliminate single-channel performance penalties on the on-board portion; asymmetric memory configurations may introduce latency variance in workloads sensitive to memory bandwidth.
  • SO-DIMM modules meeting DDR4-3200 specifications and standard voltage ratings (1.2 V) are warranty-safe upgrade components; however, the on-board memory remains soldered and cannot be serviced without component-level rework.
  • The combination of a single upgrade slot and pre-soldered memory significantly restricts future scalability; this platform does not support configurations exceeding 16 GB regardless of application demands.