LENOVO ThinkPad E595 RAM upgrade specifications
LENOVO ThinkPad E595 memory upgrade specifications include two SO-DIMM slots supporting DDR4-SDRAM modules operating at 2400 MHz frequency. The laptop model accommodates maximum RAM capacity of 32 GB total, enabling memory expansion from factory configuration. Compatible memory modules must utilize SO-DIMM form factor meeting DDR4-SDRAM standards for proper system integration and performance specifications.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2400 MHz |
| Maximum RAM | 32 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2400 (PC4-19200) |
| Bandwidth | 19.2 GB/s |
| Laptop Release date | 19 July 2019 |
Additional Notes
- Dual channel architecture requires matching memory modules in both slots to maximize the integrated graphics bandwidth on the LENOVO ThinkPad E595.
- Physical installation requires a standard Philips head screwdriver and a non-conductive prying tool to release the internal plastic clips of the bottom chassis.
- Higher frequency modules will automatically downclock to the 2400 MHz system limit due to chipset constraints.
- The 32 GB capacity threshold is determined by the internal memory controller logic rather than the physical slot count.
- Synchronizing the CAS latency across both SO-DIMM slots prevents system instability and boot failures.
- Replacing the factory memory does not void the base hardware warranty provided no physical damage occurs to the internal components during the process.
- Standard voltage DDR4 modules are required as low voltage variants might lead to power delivery inconsistencies during high load states.