MSI Creator A10SF-024FR RAM upgrade specifications
MSI Creator 15 A10SF-024FR laptop RAM upgrade specifications include two SO-DIMM slots supporting DDR4-SDRAM memory at 2666 MHz frequency. Maximum memory capacity reaches 64 GB. Compatible RAM upgrades must utilize SO-DIMM form factor modules. Current memory configurations can be expanded by replacing or supplementing existing modules within available slots. Specifications define supported memory technology and upgrade parameters for this laptop model.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2666 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2666 (PC4-21328) |
| Bandwidth | 21.3 GB/s |
| Laptop Release date | 13 October 2020 |
Additional Notes
- Dual channel memory architecture requires installing modules in identical pairs to achieve maximum memory bandwidth and prevent data processing bottlenecks.
- The MSI Creator A10SF-024FR utilizes a SODIMM form factor which restricts upgrades to laptop specific modules and is incompatible with desktop DIMM hardware.
- System stability is maintained by matching the existing 2666 MHz frequency because the motherboard firmware lacks support for high speed XMP profiles common in gaming grade RAM.
- Replacing the 2 slots to reach the 64 GB limit necessitates the removal of all factory installed memory since no additional expansion headers exist.
- Installing modules with lower latency timings than the original equipment may result in the system defaulting to the slowest shared SPD profile across both channels.
- Accessing the memory slots requires the removal of the bottom chassis panel which may involve piercing a factory seal sticker and impacting local warranty terms depending on regional consumer laws.
- Physical clearance within the slim chassis prevents the use of SODIMM modules equipped with thick integrated heat spreaders.