MSI Creator A10UET-220FR RAM upgrade specifications
The MSI Creator 15 A10UET-220FR laptop features DDR4-SDRAM memory configuration with two SO-DIMM slots supporting maximum RAM capacity of 64 GB. Memory upgrade specifications indicate compatible modules operating at 3200 MHz frequency. Existing memory slots accommodate standard SO-DIMM form factor modules. RAM upgrade options enable users to expand system memory up to 64 GB total capacity. These specifications detail compatible memory modules for system enhancement on the MSI Creator 15 A10UET-220FR model.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 3200 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-3200 (PC4-25600) |
| Bandwidth | 25.6 GB/s |
| Laptop Release date | 04 January 2021 |
Additional Notes
- Dual channel memory architecture requires installing modules in identical pairs to maximize the processor integrated graphics bandwidth.
- The maximum capacity threshold indicates that the system firmware supports high density 32 GB modules per slot.
- Potential clock speeds are governed by the internal memory controller which may downclock 3200 MHz modules if the specific CPU variant lacks the native profile support.
- Physical access to the SO-DIMM slots in the MSI Creator A10UET-220FR typically necessitates removing the entire bottom chassis panel which may involve piercing a factory seal sticker.
- Non ECC unbuffered modules are required as the motherboard chipset does not support error correction code parity.
- Mixing modules with different CAS latencies will force the system to operate at the timing of the slowest installed chip resulting in increased memory latency.
- Total system power draw increases slightly when utilizing both slots at maximum capacity which can marginally reduce battery runtime during memory intensive tasks.