MSI Creator 17M A10SE-209BE RAM upgrade specifications
The MSI Creator 17M A10SE-209BE laptop features DDR4-SDRAM memory specifications with two SO-DIMM slots available for upgrade. Maximum RAM capacity reaches 64 GB total, supporting memory modules operating at 2666 MHz frequency. Compatible memory modules must utilize the SO-DIMM form factor. Specifications detail the memory upgrade slots and capacity supported by this MSI 17M series model.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR4-SDRAM |
| Frequency | 2666 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.2V |
| Number of pins | 260-pin |
| Interface | PC4 |
| PC Speed Rating | PC4-2666 (PC4-21328) |
| Bandwidth | 21.3 GB/s |
| Laptop Release date | 21 August 2020 |
Additional Notes
- The dual slot configuration requires synchronous pairs to enable dual channel bandwidth for latency sensitive creative workloads.
- The **MSI Creator 17M A10SE-209BE** internal chassis architecture necessitates the complete removal of the bottom panel for memory access which involves piercing a factory seal sticker in certain regions.
- Installing modules with frequencies higher than 2666 MHz results in automatic downclocking to match the integrated memory controller hardware ceiling.
- Reaching the 64 GB maximum threshold requires 2 high density 32 GB modules as there are no additional expansion banks available.
- Upgrading memory requires disconnecting the internal battery first to prevent accidental short circuits on the motherboard logic board.
- The SO-DIMM form factor limits heat dissipation compared to desktop memory so users should avoid modules with thick integrated heat spreaders that might cause physical clearance issues against the back cover.
- Mixing different CAS latency timings across the 2 slots forces the system to default to the slowest common denominator which impacts rendering speeds.