MSI Cyborg 15 A12VF-007BE RAM upgrade specifications
The MSI Cyborg 15 A12VF-007BE laptop features DDR5-SDRAM memory upgrade specifications with two SO-DIMM slots supporting maximum capacity of 64 GB. Memory modules operate at 4800 MHz frequency. Compatible RAM upgrades utilize SO-DIMM form factor. Specifications indicate existing slots accommodate DDR5 memory configurations for enhanced system performance and multitasking capabilities.
Memory Upgrade Specifications
| Specification | Value |
|---|---|
| Memory slots | 2x SO-DIMM |
| Form factor | SO-DIMM |
| Memory type | DDR5-SDRAM |
| Frequency | 4800 MHz |
| Maximum RAM | 64 GB |
| Voltage | 1.1V |
| Number of pins | 262-pin |
| Interface | PC5 |
| PC Speed Rating | PC5-4800 (PC5-38400) |
| Bandwidth | 38.4 GB/s |
| Laptop Release date | 08 February 2023 |
Additional Notes
- Dual channel memory architecture requires installing modules in pairs to maximize the integrated memory controller throughput for the MSI Cyborg 15 A12VF-007BE.
- The 64 GB capacity limit necessitates the replacement of both factory modules since no additional expansion slots exist beyond the 2 primary headers.
- Utilizing memory modules with speeds exceeding 4800 MHz will result in automatic downclocking to match the system firmware constraints and processor bus limitations.
- Physical installation requires high density SO-DIMM modules as the motherboard does not accommodate full size desktop DIMM hardware.
- Latency performance depends on matching the CAS latency across both slots to prevent system instability or boot failure during POST.
- Upgrading memory requires the removal of the entire bottom chassis plate which may involve breaking a factory seal depending on regional warranty policies.
- The transition to the DDR5 standard provides increased bandwidth per core compared to previous generations but requires 262 pin hardware incompatible with DDR4 sockets.